Planet MGSD-10080F User Manual Download Page 76

Page: 76 / 641

User’s Manual of MGSD-10080F



Drop

: Drop the package when receiving a DHCP message that already

contains relay information.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.2.10 DHCP Relay Statistics

This page provides statistics for DHCP relay. The DHCP Relay Statistics screen in

Figure 4-2-13

appears.

Figure 4-2-13:

DHCP Relay

Statistics Page Screenshot

The page includes the following fields:

Server Statistics

Object

Description

•

Transmit to Server

The number of packets that are relayed from client to server.

•

Transmit Error

The number of packets that resulted in errors while being sent to clients.

•

Receive form Server

The number of packets received from server.

•

Receive Missing Agent

Option

The number of packets received without agent information options.

•

Receive Missing

Circuit ID

The number of packets received with the Circuit ID option missing.

•

Receive Missing

Remote ID

The number of packets received with the Remote ID option missing.

•

Receive Bad Circuit ID

The number of packets whose Circuit ID option did not match known circuit ID.

•

Receive Bad Remote

The number of packets whose Remote ID option did not match known Remote

ID.

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands

Planet MGSD-10080F, User Manual

Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands