Planet MGSD-10080F User Manual Download Page 344

Page: 344 / 641

User’s Manual of MGSD-10080F

344

•

Format

This is the configuration of the two possible Maintenance Association Identifier

formats.

ITU ICC

: This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7

char.

IEEE String

: This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG

id' can be max. 8 char.

•

ICC/Domain Name

This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name -

depending on 'Format'. See 'Format'.

•

MEG Id

This is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name -

depending on 'Format'. See 'Format'. In case of ITU ICC format this can be max.

7 char. If only 6 char. is entered the MEG ID value[13] will become NULL.

•

MEP Id

This value will become the transmitted two byte CCM MEP ID.

•

cLevel

Fault Cause indicating that a CCM is received with a lower level than the

configured for this MEP.

•

cMEG

Fault Cause indicating that a CCM is received with an MEG ID different from

configured for this MEP.

•

cMEP

Fault Cause indicating that a CCM is received with an MEP ID different from all

'Peer MEP ID' configured for this MEP.

•

cAIS

Fault Cause indicating that AIS PDU is received.

•

cLCK

Fault Cause indicating that LCK PDU is received.

•

cSSF

Fault Cause indicating that server layer is indicating Signal Fail.

•

aBLK

The consequent action of blocking service frames in this flow is active.

•

aTSF

The consequent action of indicating Trail Signal Fail to-wards protection is active.

•

Delete

This box is used to mark a Peer MEP for deletion in next Save operation.

•

Peer MEP ID

This value will become an expected MEP ID in a received CCM - see 'cMEP'.

•

Unicast Peer MAC

This MAC will be used when unicast is selected with this peer MEP. Also this

MAC is used to create HW checking of receiving CCM PDU (LOC detection) from

this MEP.

•

cLOC

Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this

peer MEP.

•

cRDI

Fault Cause indicating that a CCM is received with Remote Defect Indication -

from this peer MEP.

•

cPeriod

Fault Cause indicating that a CCM is received with a period different from what is

configured for this MEP - from this peer MEP.

•

cPriority

Fault Cause indicating that a CCM is received with a priority different from what is

configured for this MEP - from this peer MEP.

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands

Planet MGSD-10080F, User Manual

Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands