Planet MGSD-10080F User Manual Download Page 104

Page: 104 / 641

User’s Manual of MGSD-10080F

104

The page includes the following fields:

Object

Description

•

Delete

Check to delete the entry. It will be deleted during the next save.

•

Security Model

Indicates the security model that this entry should belong to. Possible security

models are:



: Reserved for SNMPv1.



v2c

: Reserved for SNMPv2c.



usm

: User-based Security Model (USM).

•

Security Name

A string identifying the security name that this entry should belong to.

The allowed string length is 1 to 32, and the allowed content is the ASCII

characters from 33 to 126.

•

Group Name

A string identifying the group name that this entry should belong to.

The allowed string length is 1 to 32, and the allowed content is the ASCII

characters from 33 to 126.

Buttons

: Click to add a new group entry.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.3.4.4 SNMPv3 Views

Configure SNMPv3 views table on this page. The entry index keys are View Name and OID Subtree. The SNMPv3 Views

screen in

Figure 4-3-6

appears.

Figure 4-3-6:

SNMPv3 Views Configuration Page Screenshot

The page includes the following fields:

Object

Description

•

Delete

Check to delete the entry. It will be deleted during the next save.

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands

Planet MGSD-10080F, User Manual

Search results

Summary of Contents for MGSD-10080F

Reviews:

Brands by name

Popular brands