manualshive.com logo in svg

Planet MGSD-10080F, User Manual

Share
Download
Planet MGSD-10080F User Manual Download Page 148

User’s Manual of MGSD-10080F 

 

 

148 

 

4.6.13 IP Subnet-based VLAN 

This page allows for adding, updating and deleting IP subnet-based VLAN entries and assigning the entries to different ports.   

The IP subnet-based VLAN screen in 

Figure 4-6-19

 appears. 

 

Figure 4-6-19:

 IP Subnet-based VLAN Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

•

 

Delete 

To delete an IP subnet-based VLAN entry, check this box and press save. The 

entry will be deleted in the stack. 

•

 

VEC ID 

Indicates the index of the entry. It is user configurable. Its value ranges from 
0-256. If a VCE ID is 0, application will auto-generate the VCE ID for that entry. 
Deletion and lookup of IP subnet-based VLAN are based on VCE ID. 

•

 

IP Address 

Indicates the IP address. 

•

 

Mask Length 

Indicates the network mask length. 

•

 

VLAN ID 

Indicates the VLAN ID. VLAN ID can be changed for the existing entries. 

•

 

Port Members 

A row of check boxes for each port is displayed for each IP subnet-based VLAN 
entry. To include a port in an IP subnet-based VLAN, check the box. To remove or 
exclude the port from the IP subnet-based VLAN, make sure the box is 
unchecked. By default, no ports are members, and all boxes are unchecked 

 

Buttons 

: Click to add a new IP subnet-based VLAN entry. 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

Auto-refresh 

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

 

: Click to refresh the page immediate

 

 

 

 

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands