manualshive.com logo in svg

Planet MGSD-10080F, User Manual

Share
Download
Planet MGSD-10080F User Manual Download Page 151

User’s Manual of MGSD-10080F 

 

 

151 

 

The page includes the following fields: 

Object 

Description 

•

 

Delete 

To delete a Group Name to VLAN map entry, check this box. The entry will be 

deleted on the switch during the next Save 

•

 

Group Name 

A valid Group Name is a string of atmost 16 characters which consists of a 

combination of alphabets (a-z or A-Z) and integers(0-9), no special character is 

allowed. Whichever Group name you try map to a VLAN must be present in 

Protocol to Group mapping table and must not be preused by any other existing 

mapping entry on this page. 

•

 

VLAN ID 

Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges 

from 1-4095. 

•

 

Port Members 

A row of check boxes for each port is displayed for each Group Name to VLAN ID 

mapping. To include a port in a mapping, check the box. To remove or exclude 

the port from the mapping, make sure the box is unchecked. By default, no ports 

are members, and all boxes are unchecked. 

 

Buttons 

: Click to add a new entry in mapping table. 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

Auto-refresh 

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

 

: Click to refresh the page immediate

 

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands