Planet MGSD-10080F User Manual Download Page 260

Page: 260 / 641

User’s Manual of MGSD-10080F

260

Selected Counters

Object

Description

•

Selected Counters

The Selected Counters table is visible when the port is one of the following

administrative states:



Multi 802.1X



MAC-based Auth

The table is identical to and is placed next to the Port Counters table, and will be empty if

no MAC address is currently selected. To populate the table, select one of the attached

MAC Addresses from the table below.

Attached MAC Address

Object

Description

•

Identity

Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.

Clicking the link causes the supplicant's EAPOL and Backend Server counters to be

shown in the Selected Counters table. If no supplicants are attached, it shows No

supplicants attached.

This column is not available for MAC-based Auth.

•

MAC Address

For Multi 802.1X, this column holds the MAC address of the attached supplicant.

For MAC-based Auth., this column holds the MAC address of the attached client.

Clicking the link causes the client's Backend Server counters to be shown in the

Selected Counters table. If no clients are attached, it shows No clients attached.

•

VLAN ID

This column holds the VLAN ID that the corresponding client is currently secured

through the Port Security module.

•

State

The client can either be authenticated or unauthenticated. In the authenticated state, it is

allowed to forward frames on the port, and in the unauthenticated state, it is blocked. As

long as the backend server hasn't successfully authenticated the client, it is

unauthenticated. If an authentication fails for one or the other reason, the client will

remain in the unauthenticated state for Hold Time seconds.

•

Last Authentication

Shows the date and time of the last authentication of the client (successful as well as

unsuccessful).

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

: Click to refresh the page immediate.

Summary of Contents for MGSD-10080F


































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MGSD-10080F

Reviews:

Related manuals for MGSD-10080F

Brands by name

Popular brands

Planet MGSD-10080F, User Manual

Search results

Summary of Contents for MGSD-10080F

Reviews:

Related manuals for MGSD-10080F

Brands by name

Popular brands