manualshive.com logo in svg

Planet GS-5220 Series, User Manual, Page: 399 / 568

Share
Download
Planet GS-5220 Series User Manual Download Page 399

User’s Manual of GS-5220 LCD Series 

 

 

399 

 

•

 

Key 

The secret key - up to 63 characters long - shared between the 
 server and the switch. 

 

Server Configuration 

The table has one row for each  server and a number of columns, which are:

 

Object 

Description 

•

 

Delete 

To delete a  server entry, check this box. The entry will be deleted 
during the next Save.   

•

 

Hostname 

The IP address or hostname of the server. 

•

 

Port 

The TCP port to use on the  server for authentication. 

•

 

Timeout 

This optional setting overrides the global timeout value. Leaving it blank 
will use the global timeout value. 

•

 

Key 

This optional setting overrides the global key. Leaving it blank will use the 
global key. 

 

Buttons 

:    Click to ad

d a new  server. An empty row is added to the table, and the  

server can be configured as needed. Up to 5 servers are supported. 

: Click to undo the addition of the new server. 

: Click to apply changes   

: 

Click to undo any changes made locally and revert to previously saved values. 

 

 

Summary of Contents for GS-5220 Series

























































































































































































































































































































































































































































































































































































Reviews:

No comments