Planet GS-5220 Series, User Manual, Page: 302 / 568

User’s Manual of GS-5220 LCD Series
302
• Queue Shaper Rate
Controls the rate for the queue shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it
is restricted to 1-13200 when the "Unit" is "Mbps".
The default value is
500
.
•
Queue Shaper Unit Controls the unit of measure for the queue shaper rate as " kbps " or
" Mbps ".
The default value is "kbps".
•
Queue Shaper Excess Controls whether the queue is allowed to use excess bandwidth.
•
Queue Scheduler
Weight Controls the weight for this queue.
This value is restricted to 1-100. This parameter is only shown if
"Scheduler Mode" is set to "
Weighted ".
The default value is " 17 ".
•
Queue Scheduler
Percent Shows the weight in percent for this queue. This parameter is only
shown if "Scheduler Mode" is set to "Weighted".
•
Port Shaper Enable Controls whether the port shaper is enabled for this switch port.
• Port Shaper Rate Controls the rate for the port shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it
is restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
• Port Shaper Unit Controls the unit of measure for the port shaper rate as "kbps" or
"Mbps".
The default value is "kbps".