2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
105
SMTP Server
SMTP servers
can send email upon request from the IP device. The email can be a simple
subject and text email, or attached with snapshot/video. You may set up two SMTP servers.
The device will first attempt to send the message via the Primary email SMTP server. If the
first attempt fails (after the maximum connecting time), the device will attempt to send it via
the secondary SMTP server. If the device sends email successfully via the primary SMTP
server, then it will not use the secondary SMTP server.
To set up SMTP servers, make sure to enable the SMTP account and choose the proper
Authentication type. There are many types available. The default is Login. We recommend
you to use Auto Detection. Available authentication types include: Auto Detection, None,
Login, Plain, Cram MD5, Digest MD5 and PoP Relay. Please also enter the User Name,
Password, the email address displayed as sender (can be different than the user name),
Network (SMTP server) address, Network (SMTP server) Port number and Max Connection
time before timeout (in
seconds
).
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
HTTP Server
HTTP CGI servers
are programs that run on web sites or many devices. They can be
custom-programmed to perform a large variety of actions based upon the input. You can
define which CGI server to connect to here, and the user / password required to log into the
target server. The actual message/command is setup in the Notification messages/URL
commands section. You may define two separate CGI servers.
IP devices are also CGI servers. This means that IP devices can now issue commands to
each other, which creates endless possibilities for highly coordinated response. The IP
device can also give a loopback command to itself, in effect changing almost all possible
settings dynamically. For details on the commands used to control the cameras, please