2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
137
Appendix E. Waterproofing the Cable
Connections
The camera itself is waterproof, however take note that the cable connections are not. If the
camera is mounted directly on the ceiling/wall where the cables pass through the ceiling/wall,
then your installation is complete and you do not need to waterproof the cable connections.
However, if the camera is mounted where the cables may be exposed then it is
recommended to waterproof the cable connections or use a junction box (not included in the
package).
The camera comes with a
Cable Gland
and
Conduit Gland
. It is recommended to use one
of these glands when a high PoE injector will be used with the camera. However, if the
bundled power adapter will be used or digital input/output devices will be connected, it is
recommended to house the cables inside the junction box.
Waterproofing the Cable by Cable Gland
Prepare the following items:
Cable Gland
Gland Rubber Ring
Exterior-Grade Ethernet Cable
Waterproof Tape
(not included in the package)
(not included in
the package)
Detach the cable gland as shown below.