2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
76
Host Name
is used to identify the camera by a DHCP server. In some networks with very
strict security policy, it is required that all the network devices should have their host name,
and when the devices attempt to access the network by requesting an IP address from a
DHCP server, the DHCP server would check if the host name is among the allowed devices.
On this page, it is possible to edit the Host Name and enable or disable the use of host
name.
Most installation projects include clear network topology and static IP addresses for each
camera. In such cases, you can change the camera to
Static IP Address
mode and modify
the
IP Address, Subnet Mask
and
Gateway
accordingly.
In some rare cases, the camera may be connected to the control center over Internet.