2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
46
Cameras with audio function have the audio controls on the Live View page.
- Speak to Camera
To speak to the camera, press the
button. If the camera is connected to a
network video recorder, the audio will be recorded with the video stream.
To adjust the volume level of the speakers connected to the PC that runs the web
management
in order to hear the audio from the camera’s microphone or line-in device,
use the audio controls as shown below:
Audio Muted:
Audio level adjusted to the maximum:
This volume control appears on the user interface only when the Audio-in function of the
camera has been “Enabled” under the Setup page.
The digital output controls appear on the Live View page of the cameras with digital
input/output function. The controls allow users to manually trigger a DO device.
- Select DO Port
Each DO port is controlled separately. For cameras with more than one DO port, select
the DO port and press
to set the output power level to high or
to set the output
power level to low. Consequently, setting the port to a high power level “activates” the
DO device and setting the port to a low power level “deactivates” the DO device. For
example, if an alarm is set as DO1 and
is pressed, the alarm will continuously
sound until
is pressed to deactivate the device.