2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
77
Usually, the most cost efficient way is to use ADSL connection with
PPPoE
. To avoid the
unexpected changes of IP addresses by Internet Service Provider upon the restart of the
camera, it is recommended to activate a DDNS service for such scenario, and let the control
center connect to the camera by the domain name instead. Please refer to the DDNS section
for more details.
To set the camera in PPPoE mode, set the radio button to PPPoE and key-in the User Name
and Password, provided by Internet Service Provider.
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
New IP address settings will only take effect after pressing
System -> Save & Reboot
.
3.9.2 DNS
The
DNS
section allows setting up the Domain Name Service for the camera. The camera
will connect to the DNS server when there is a need to resolve a domain name for sending
data to.
The most common usage is the FTP or e-mail server in the Event Handler section, which is
defined by using domain names. Without having DNS service configured, the camera would
not know how to resolve the domain names of FTP or e-mail servers.
It is possible to configure both
Primary
and
Secondary DNS servers
. The Secondary DNS
Server will be used when the connection to the Primary DNS Server fails.
After changing any of the items above, press
Apply
to save the changes. The
Reset
button
undoes the changes that had just been made but not Applied yet.