2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
110
Notification messages
may be sent to either an email or a HTTP CGI server. If sent to a
CGI server, it works the same as an URL command, but it does not allow a second message
at end of event. You may configure up to three preset massages. You can configure a
message, but disable it. This will allow you to keep the settings without using it, which will be
useful in testing and troubleshooting.
To set up Notification Messages, make sure to enable the message and then determine what
type of message to send (HTTP CGI or email).
If you are sending to CGI server, you need to enter the CGI path, the URL command itself,
and an optional message.
If you are sending email, please enter the recipient e-mail address, the email subject, and the
body message.
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.