2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
85
Parameters
Description
rate will be very close to 2M. This mode allows the most accurate
storage estimations, however, while planning the bandwidth, please
consider the occasional peaks of bit rate.
Quality
H.264 Compression:
Under VBR mode, the bit rate will be floating while the video quality
will be stable and follows the quality standard set by the user. The
user can choose either “High”, “Medium” or “Low” quality. The
higher is the quality level, the more bit rate the camera will use to
achieve the target quality.
MJPEG Compression:
The user can define the quality with the numeric scale from 1 to
100. The default MJPEG quality is 60. The higher is the quality
level, the more bit rate the camera will use to achieve the target
quality.
GOP
(only for H.264)
Under VBR mode it is possible to adjust the GOP length - that is the
occurrence rate of I-frames. By default, there is one I-frame per
second. For example, in case of 30fps, there will be 1 I-frame and
29 P-frames every second by default. When the GOP is changed to
“1 I-frame per 5 seconds”, then there will be one I-frame, followed
by 149 P-frames. In case of the static scenes, long GOP can further
minimize the bandwidth and storage consumption.
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.