2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
126
Parameters
Description
S2 (Video Stream 2)
S3 (Video Stream 3)
shown on
S1
timeline bar, while video from stream 2
is shown on
S2
. The bars on the timeline bar indicate
each video timeslot.
Blue
bar indicates the current selected video
timeslot; the snapshot is shown on the window.
Dark gray
bar indicates a recording is present.
Light gray
bar indicates no recording.
Red
bar indicates motion is detected on that
timeslot.
Green
bar indicates the digital input is triggered
on that timeslot.
Orange
bar indicates the sound detection is
triggered on that timeslot.
7
End Time of Time Bar
The ending time (right side) of the timeline bar.
8
Time
Unit
Select the unit of time to use to display the timeline
bar. The
default time unit is by “Hour”.
If user needs to export video, please refer the steps:
Select the starting point of the video to export from timeline bar. The bar turns blue.
1.
Click the right mouse button and select
Mark Export Start
.
Click the ending point of the video to export. The bar turns blue.
Click the right mouse button and select
Mark Export End
. The scope of the starting to the
ending timeslot is marked blue.
Click the right mouse button and select
Export Video
.
Save the video file (
.raw
).
The camera memory is allocated to deliver continuous live streaming to all
connected users or devices, such as NVR recording purposes. The camera will
store as many P-frames as possible on the memory card. However, due to camera
memory limitation, the camera may record only the I-frames on the memory card.
To increase the number of P-frames to record on the memory card, it is
recommended to lower the FPS, bit rate and resolution of stream 1.