2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
87
3.10.3.1 Motion Detection
The “Motion Detection” section allows the user to configure the video motion detection
system of the camera. Motion detection regions are based on Stream 1. By default, there are
three enabled pre-defined regions covering the whole camera view.
Click on “Setup” to adjust the motion detection regions or its parameters.
Microsoft Internet
Explorer
browser is required to configure the motion detection regions.
There are three independently configurable motion detection regions in the camera.
Each motion detection region has 6 configuration parameters:
Enabled or disabled
Location of the region
Size of the region
Sensitivity
Trigger threshold
Trigger interval
Enabled or disabled
Although all 3 motion detection regions are enabled by default, each can be disabled and
enabled individually. Look at the example: Only region 1 is enabled while 2 and 3 are
disabled. The disabled regions disappear from the video display.