2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
106
contact your customer representative.
An example will help you gain a better sense of how to utilize this unique function. Camera A
is a fixed camera that looks at a corridor leading to the main hall. It has a motion detection
window located near the point where the corridor arrives at the large hall. Camera B is a PTZ
camera located in the hall, which is usually left on auto-tour patrol. When motion activity in
the motion detection region triggers MD1 in Camera A, this then in turn activates an event
rule in Camera A that gives out a command to Camera B. Camera B would then swivel to the
preset point where the corridor leads into the entrance and switch to higher bit rate to
temporarily provide clearer image. After the event ends, Camera B will go back to its normal
routine in lower bit rate.
To set up HTTP servers, make sure to enable the HTTP server, enter the user name, the
user password, Network (HTTP Server) address, Network (HTTP Server) port number and
Max connection time before timeout (in seconds).
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
3.11.2 Event Configuration
Event configurations
are the responses to be performed when an event is triggered. For
most types of responses, you can create several different preset responses, then mix and
match in event rules.