2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
55
Click the Scan Control page tab to configure scan function.
To set or modify scan points, do the following:
(1) On Scan Points, click
of scan point 1 to set the scan starting point.
(2) Pan and tilt on the area that you want to set as scan point 1.
(3) Once done, click
again to close and complete first scan point.
(4) Click
of scan point 2 to set the scan ending point.
(5) Pan and tilt on the area that you want to set as the ending point.
(6) Once done, click
again to close and complete scan point 2.
(7) Select the preferred Scan Speed.
(8) Select the preferred Scan Direction: Clockwise or counter-clockwise.
Parameters
Description
Start Scanning
To start scanning, click
.
Stop Scanning
To stop scanning, click
.
Restart Scanning
To restart scanning from the starting point while scanning is in
progress, click
.
Return to Auto
Scan after
When scanning is interrupted by other camera operation, like pan, tilt,
zoom, etc., checking Return to Auto Scan after box enables the
camera to resume scan function after the defined period of time