2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
28
Step 2
Press the
“Refresh”
button to see the currently-connected devices in the
discovery list as the screen shows. If there is no DHCP server in the network, the
default IP of camera is
192.168.0.20
.
(1) This utility shows all necessary information from the devices, such as MAC address,
device name, firmware version and device IP subnet address. You can also assign a new
password, IP subnet address and description for the devices.
(2) After setup is completed, press the
“Update Device”
,
“Update Multi”
or
“Update All”
button to take affect. The definitions of the 3 buttons above are shown below:
Update Device
: Use the current setting on one single device.
Update Multi:
Use the current setting on choose multi-devices.
Update All:
Use the current setting on whole devices in the list.
The same functions mentioned above can also be found in
the
“Option”
tools bar.
To click the
“Control Packet Force Broadcast”
function, it allows you to assign a new
setting value to the Web Smart Switch under a different IP subnet address.
(3) Press the
“Connect to Device”
button and the Web login screen will appear.
(4) Press the
“Exit”
button to shut down the planet Smart Discovery Utility.