2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
117
suddenly removed from the device.
What responses will occur?
Available responses vary depending on what triggered the event.
Digital Output
(selected models only): This is a useful link to other devices. Click to include
this in the response for this rule.
Send notification Message
: Select from the three pre-
defined messages which you’ve
setup in the Event Configuration section. You may enable multiple messages at the same
time. For sending Email, please limit the recipient to one per event rule. If you need to send
email to more than one recipient, please use separate event rules triggered by the same
trigger.
Upload video/snapshots
: Select which of the event configurations to include in this
response set. If you are sending email via upload video and sending notification message at
the same time, the system will automatically merge the two emails into one. The subject and
image will be based upon the Upload snapshot Event configuration enabled, but the
message in the body text will be based upon the Notification messages.
In general, please stick to the “one email per event rule” limit for best performance.
Change Motion Detection profile
: This will switch the profile of the selected Motion
Detection region from Runtime profile to Event profile. The profile will return to runtime
settings at the end of this event. You may program one motion detection region to be
disabled at runtime, but enable it with event handler under some circumstances.
Send URL command
: Select the URL command to include in the response set. Two
different commands will be sent at the time when the event is triggered and un-triggered. For
example, going to a preset point, if the device is a PTZ camera, and there are preset points
already configured in PTZ setup page, then you may include this in the response section of
the event rule by using Send URL Command method. It is possible to let the camera return to
another preset point at the end of the event.