![background image](http://html1.mh-extra.com/html/falcon-eyes/digital-macro-flash-dmr/digital-macro-flash-dmr_instruction-manual_540306001.webp)
2
1
3
SPECIFICATION
6(m) x 2
IMPORTANT
- Canon E-TTL
- Pentax P-TTL
- Sony ADI
- Nikon i-TTL
- Olympus & Panasonic TTL
This macro flash has TTL AUTO function built-in. It is compatible with the
following TTL metering system:
In order to use this macro flash, you must also purchase a TUMAX DMF880 digital
flash unit. Please choose a DMF880 digital flash unit that works with your
camera's TTL metering system. Failed to doing this may result in malfunction of
or serious damage to the macro flash.
Weight
15.90 g
Size
Approx. 13 cm x 12 cm x 3 cm
(W x L x H)
Illuminator
Two built-in flashtubes on left and right side of
Flash Mode
Canon E-TTL; Nikon i-TTL; Pentax P-TTL;
Olympus & Panasonic TTL; Sony ADI
Guide No (ISO 100)
Thanks for purchasing Falcon Eyes Digital Macro Flash DMR. You will be able to enjoy a superb macro photography
experience with the use of this product. DMR is an advanced product and should be used with care. On the other
hand, the operation of DMR may vary depending on the brand of your cameras. Therefore, please read this
instrcution manual carefully before using this product.
Instruction Manual for DMR Digital Macro Flash
ATTACHING DMF880 DIGITAL FLASH UNIT TO THE CAMERA
Please refer to the instruction manual of the DMF880 digital flash unit for details.
ATTACHING THE MACRO FLASH DMR
Warning:
Be sure that the power of the DMF880 digital flash unit is turned off before
connecting
the macro flash. Failed to doing this may result in the malfunction or damage
of the DMR.
Please follow the steps below to attach your macro flash to the front of your camera
lens:
1. Attach the macro flash adapter ring to the lens' filter thread.
Note:
The macro flash adapter ring provided may not fit your lens. If so, you have to
buy an
conversion ring or a adapter ring that match the size of your lens.
2. Press the release tabs on both sides of the macro flash. Place it over the adapter
ring and
then release the tabs. You can rotate the macro flash to adjust its position.
3. Insert the macro flash plug into the socket of your DMF880 digital flash unit.
DETACHING THE MACRO FLASH DMR
Warning:
Be sure that the power of the DMF880 digital flash unit is turned off before
connecting
the macro flash. Failed to doing this may result in the malfunction or damage
of the DMR.
To detach your macro flash to the front of your camera lens, you should do the follow-
ing:
1. Press the release tabs on the sides of the macro flash to detach it from the macro
flash
adapter ring. Then remove the macro flash adapter ring from the camera lens.
2. Unplug the macro flash cord from the socket of the DMF880 digital flash unit.
FEATURES OF THE MACRO FLASH
Flashtubes
This macro flash has two flashtubes, one on each side of the flash. The tubes can be
turned on or off separately using the light selector switches at the back of the macro
flash. To turn on any one of the flashtubes, push the corresponding switch to the side
with the “ON" label.
While the two flashtubes are on, you can get a homogeneous, shadowless illumination
for your target. If you turn off one of the flashtubes, shadow could be created, which
gives the subject a three-dimensional feel.
Auxiliary Lights
The auxiliary lights are located at the top and bottom of the macro flash. These
lights could help you focus in dark place in AUTO mode.
OPERATING THE MACRO FLASH
We suggest that you use a macro lens and choose an aperture as small as practically
possible to maximize the depth of field. The exposure mode for your camera should be
set to either Aperture Priority or Manual. These modes will allow proper exposure and
good focusing at macro ranges.
Please read the following instructions in order to correctly operate the macro flash:
1. Turn on the power of the DMF880 digital flash unit after connecting the macro
flash. The
Ready lamp will turn red when charging is completed.
Note:
The DMF880 digital flash unit may not operate properly if the battery power is
insufficient.
Replace your batteries if the Ready lamp does not light up after 30 seconds. For
more information on the correct use of batteries, please refer to the DMF880
instruction manual.
2. Adjust the setting of your camera to get a good focus of your target at macro
ranges. Shoot
your target by pressing the shutter button of your camera. The Auto OK indicator on
the DMF880 digital flash unit will light up when the macro flash flashes.
SWITCHING ON AND OFF THE DMF880 DIGITAL FLASH UNIT
The DMF880 digital flash unit can be turned on or off using the switch found on the
side of the front cover. If you push the switch down, the DMF880 flash unit will flash
together with the macro flash to provide powerful lighting to your subject. It will be
switched off if the switch is pushed up.
MATCH WITH LENS
Our macro flash can be used with most of the brands of macro lens in the markets.
However, please be aware of the following points before using the macro flash:
1. The front part or other parts of some of the macro lenses in the market could rotate
while
focusing. Attaching the macro flash on these lenses may obstruct their motion or even
damage these lenses. Therefore, we strongly recommend you to operate your camera with
this type of lens in MANUAL mode and make sure that there is no obstacle in the vicin-
ity of the camera while photographing your subject. This could avoid any damages make
to the lens or the macro flash.
2. It is possible that your image may be affected by vignetting while taking photos with
the macro
flash. This may be related to the focal length of the lens or the distance of subject
at the time of photography. Please take some test shots first to be sure that your
camera settings does not causes this problem.
PHOTOGRAPHY TIPS
In order to get a good macro shot, we recommend the following to you:
1. Photograph your subject against a reflective surface to minimize shadows on your
targets.
2. Rotate the macro flash around the lens to a position where the light coming from the
flashtubes
could eliminate the shadows around the subject.
3. Turn on the DMF880 digital flash unit and/or add a reflector plate on the flash head
while
necessary to increase the lighting.
1. Auxiliary Lights
2. Flashtubes
3. Release Tabs
4. Connector Cord
5. TTL Switch for Flashtubes
6. Macro Flash Adapter Ring
98022A
1
6
3
3
4
1
2
2
5