Planar Dome Md5/PCI, Installation Manual

Page: 74 / 150

62 Chapter 2
Using the DOME tab to change display properties
You can change these display properties with the DOME
tab after the display is attached to the Windows 2000
desktop.
To change display properties
1. Log onto Windows 2000 as administrator.
2. Right-click the desktop, and select Properties ->
Settings
tab.
The Settings tab appears.
3. Select Default Monitor on DOME Md2/PCI, Md4/PCI,
Md5/PCI, or Md8/PCI
from the Display box.
4. Click Advanced -> DOME tab to select a resolution and
refresh rate.
Changing Display Properties
To complete this task… See page…
Change the resolution and refresh rate 79
Set monitor preferences 80
Set driver options 80
Select palette options 81
Set custom syncs 84
Make sure the Extend my Windows desktop onto
this monitor
box is checked.