Planar Dome Md5/PCI, Installation Manual

Page: 3 / 150

FCC Compliance Statement iii
FCC Compliance Statement
FCC Class A
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause interference to radio communications. It has been tested and
found to comply with the limits of a Class A computing device pursuant
to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against interference when operated in a com-
mercial environment. Operation of this equipment in a residential area
is likely to cause interference, in which case the user will be required at
his or her own expense to take whatever measures may be required to
correct the interference.
If the equipment does cause interference to radio or television reception,
which can be determined by turning the equipment on and off, one or
more of the following measures may reduce or eliminate the problem.
• Move the equipment and the receiver to different branches of your
AC electrical system.
• Move the equipment away from the receiver with which it is
interfering.
• Reposition the equipment or receiver. Reposition the receiver’s
antenna.
• Be sure that the equipment is plugged into a grounded outlet and
that the grounding has not been defeated with a cheater plug.
If none of the measures resolves your interference problems, write to
the U.S. Government Printing Office, Washington, DC, 20402, for the
Interference to Home Electronic Entertainment Equipment Handbook , Stock
Number 004-000-000498-1.
This equipment is a Class A digital apparatus that complies with the
Radio Interference Regulations CRC C.1374.
In addition, this equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against
harmful interference in residential installations.