Planar Dome Md5/PCI, Installation Manual

Page: 73 / 150

Installing the Md5/PCI Board in a PC 61
Configuring Display Settings in Windows 2000
After you install the board and driver and set the default
monitor and refresh rate, you can change the resolution
and refresh rate or any other configuration options.
Determining screen assignments
Setting the Default Monitor and Refresh Rate
Use this menu... To set the default monitor and refresh rate for...
DOME tab Displays attached to the Windows 2000
desktop
Properties ->
Settings tab Displays
not attached to the Windows 2000
desktop
The Windows 2000 operating system renumbers and
reassigns screens as they are added to the configuration.
Set resolutions or preferences only after all boards and
screens are installed. Then restart your system to make
sure the screen assignments are stable.
Use the Identify button in the Settings tab to see which
screens are associated with which boards.