Planar Dome Md5/PCI, Installation Manual

Page: 143 / 150

Md5/PCI Board Resolutions and Refresh Rates 131
Change individual sync parameters in the text sync file
or add new individual syncs at the end of the file to
create a new mode.
2. Save the text sync file.
3. Open a DOS window.
4. Change directory to
C:\dome\tools
.
5. Run the
mdconfig
program from a DOS window to
build the corresponding
.cfg
file.
The program asks you to enter the system windows
directory.
6. Type
C:\winnt
or your corresponding windows
directory.
The program asks if you want to back up your existing
.cfg
file.
7. Type
y
.
The program rebuilds the
.cfg
file according to the
new syncs. It puts the new
.cfg
file into the appropri-
ate directory.
It backs up the existing
.cfg
file as a
.cfg.bak
file in
the
windows dir\system32\drivers
directory,
where
windows dir
is the directory you specified as
your system windows directory.
8. Restart your computer for the new syncs to take effect.
Make sure there are no empty lines at the end of the
.vid
file.