Planar Dome Md5/PCI, Installation Manual

Page: 121 / 150

Installing the Md5/PCI Board in a Digital UNIX Workstation 109
3. Mount the disk with this command:
# mount -r /dev/fd0c /mnt
To determine the kit name
Before you load the kit, you must determine the kit name,
in case you experience any problems with the installation.
You must know your kit name if you have problems boot-
ing, or if you want to uninstall the driver kit. In the com-
mands for booting in single-user mode and uninstalling the
kit, you must replace the string
KITNAME
with the name of
the kit.
You can determine the kit name in these ways:
• Check the diskette label for the name.
• Perform a directory listing on the diskette.
To perform a directory listing
To perform a directory listing, you must have mounted the
diskette on
/mnt
as described in step 2 on page 108.
To perform a directory listing, type:
# ls /mnt
The system responds with the mounted directory, for
example:
DOMMDPCI100 instctrl
The sample kit name is
DOMMDPCI100
.
If your floppy disk device is not
/dev/fd0c
,
substitute the name of your floppy disk device
where you see
/dev/fd0c
. Similarly, if you use a
different mount directory from
/mnt
, substitute
that directory when you mount the disk.