Pioneer DVJ-1000, Operating Instructions Manual

Page: 28 / 319

Preparations (Setup)
22
En <DRB1414>
MPEG output
Set this option to [ MPEG ] if the connected amplifier supports
MPEG audio.
—
—
—
—
—
SETUP
V2 Video1
General A2
Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Off
MPEG
MPEG
3
PCM
Change MPEG audio output mode
MPEG:
Select this option if the connected amplifier or decoder supports
MPEG audio.
MPEG
3
PCM:
MPEG signals are converted to linear PCM for output. Select
this option if the connected amplifier does not support MPEG
(factory default setting).
Digital output ON/OFF (Expert Mode)
This setting allows disabling of outputs from the digital audio
output connectors.
—
—
—
—
—
—
V2 Video1
General A2
Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Digital Out
Audio1
Off
Dolby Digital
Off
96kHz
3
48kHz
MPEG
3
PCM
On
Off
SETUP
On:
Signals are output from the rear panel digital output connectors
(factory default setting).
Off:
Signals are not output from the rear panel digital output connec-
tors.
[Audio2] settings
¶
See P.20 for menu instructions.
Surround setting
★
This option is not supported in DJ mode.
This function is supported only when connected to the audio
output connectors. Not supported during use of DTS audio, lin-
ear PCM 96 kHz audio.
—
Audio2 Video1
Language General
A1 V2
Exit Move
Virtual Surround
Legato
Off
TruSurround
Surround effect from 2 speakers
SETUP
Off:
Disabled (factory default setting)
TruSurround:
Select for virtual surround sound.
¶
If [ TruSurround ] is selected during playback of DVD Dolby
Digital 2ch discs, the audio level produced from the digital
output connectors will be reduced.
Also note that if the [
Audio1 ] menu item [ Dolby Digital Out ]
is set to [ Dolby Digital
3
PCM ] when playing discs other
than those recorded in Dolby Digital 2ch format, selecting
[
TruSurround ] will cause audio output to be disabled from
the digital output connectors.
¶
Some discs may produce less surround effect than others.
Legato PRO function
Select from among the four ambience modes based on your
own preferences and the style of music being played. The char-
acteristics of the four modes are as follows:
Audio2 Video1
Language General
A1 V2
Exit Move
Virtual Surround
Legato PRO
Off
Standard
Effect1
Effect2
Effect3
SETUP
Wide Range Digital filter
You can select the quality of sound.
Off:
Legato function disabled (factory default setting).
Standard:
Produces full-bodied sound presence.
Effect1:
Produces bright, vivid sound.
Effect2:
Produces sound with depth and reserve.
Effect3:
Produces sound with solid bass and balance.
¶
The Legato PRO function operates to change the audio digital
filter response of those bands primarily outside the audio
range.
¶
The amount of tonal change may vary, depending on the lis-
tening room environment.
■
Supports Dolby
*1
Digital / DTS
*2
for genuine
theater-like sound impact
By connecting an amplifier supporting Dolby Digital/DTS, you
can enjoy the immediacy and power of 5.1 channel movies
and music DVDs.
■
Equipped with SRS TruSurround
(Virtual Surround)
Recreates the ambience of 5.1 channel sound using only 2
speakers.
SRS TruSurround
*3
technology performs direct
processing of 5.1 channel digital sound data.
*1 Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
*2 “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Sys-
tems, Inc.
*3 TruSurround, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.