Pioneer CDJ-800MK2, Service Manual

Page: 141 / 228

CDJ-800MK2
141
5 6 7 8
5 6
7
8
C
D
F
A
B
E
36 35
32 31 33 34
28. TRACK SEARCH buttons ( , )
29. Reverse button / indicator (REV)
When this button is pressed, its indicator lights and the unit is set to
reverse play.
30. AUTO BEAT LOOP buttons / indicators (1, 2, 4, 8)
(1/8, 1/4, 1/2, 1/1)
When this button is pressed, auto loop play is performed based on
the track’s BPM (1 beat, 2 beats, 4 beats or 8 beats).
When a loop has been set manually, the button operates as a loop
shortening button. (
1 =1/8, 2 =1/4, 4 =1/2, 8 =1/1).
Rear Panel
31. AC inlet (AC IN)
Use the accessory power cord to connect this inlet to a standard AC
power outlet.
32. POWER OFF/ ON switch
33. CONTROL connector
When the accessory control cord is used to connect this connector
to the corresponding CONTROL connector on a Pioneer DJ mixer,
the DJ mixer can be used to control the CD player for fader start play
and back cue.
Also, by connecting this connector to the CONTROL connector on
another Pioneer DJ CD player, automatic relay play can be performed.
34. DATA IN/OUT connector
When a commercially available miniplug cord (or the accessory con-
trol cord) is used to connect this jack to the same jack on another
CDJ-800MK2, recorded data such as cue points and loop points can
be copied from one player to the other .
35. AUDIO OUT L, R connectors
RCA-type analog audio output jacks.
36. DIGITAL OUT connector
RCA type coaxial digital output connectors used to connect a DJ
mixer or AV amplifier, CD player, etc., equipped with digital input
connectors. The digital outputs here support all DJ and other func-
tions, but only audio data is output (without subcodes; CD graphics
are not supported).