6 Startup
64
Version: 1.2.1
MS249E
C-863.12 Mercury Controller
✓
You have installed the latest version of the PISTAGES3.DB database onto your PC (p.
39).
✓
If PI provided a custom positioner database for your positioner, the dataset was
imported into PIStages3 (p. 41).
✓
You have installed the positioner in the same way as it will be used in your application
(corresponding load, orientation, and mounting).
✓
You have connected the C-863.12 to the positioner (p. 44).
✓
You have established communication with PIMikroMove between the C-863.12 and the
PC (p. 54).
Starting motion with PIMikroMove
1.
If in PIMikroMove the
Select connected stages
step is displayed, select the positioner
type of the positioner connected:
If the correct positioner type is already listed in the
Current stage type
column in the
Controller axes
list on the right of the window:
−
Click
OK
.
If the listed positioner type is not correct:
a)
Mark the positioner type in the
Stage database entries
list.
b)
Click
Assign
.
c)
Confirm the selection with
OK
.
Figure 14: Start up controller
–
Select connected stages
2.
Specify how you want to load the parameter settings into the C-863.12 in the
Save all
changes permanently?
dialog box: