PI MS249E, User Manual, Page: 250 / 279

9 Adapting Settings
244 Version: 1.2.1 MS249E C-863.12 Mercury Controller
ID Type CL Element Parameter name Description
Parameters for Digital Inputs" (p. 84)
and "Using Digital Input Signals as
Switch Signals" (p. 86).
0x5D INT 0 Axis
Source Of Negative
Limit Signal Reference signal source for the
FNL
or
FED
commands
For details, see "Commands and
Parameters for Digital Inputs" (p. 84)
and "Using Digital Input Signals as
Switch Signals" (p. 86).
0x5E INT 0 Axis
Source Of Positive
Limit Signal Reference signal source for the
FPL
or
FED
commands
For details, see "Commands and
Parameters for Digital Inputs" (p. 84)
and "Using Digital Input Signals as
Switch Signals" (p. 86).
0x5F INT 0 Axis Invert Digital Input
Used For Negative
Limit Inverts the polarity of the digital
inputs that are used as the source of
the negative limit switch signal.
For details, see "Commands and
Parameters for Digital Inputs" (p. 84)
and "Using Digital Input Signals as
Switch Signals" (p. 86).
0x60 INT 0 Axis Invert Digital Input
Used For Positive
Limit Inverts the polarity of the digital
inputs that are used as the source of
the positive limit switch signal.
For details, see "Commands and
Parameters for Digital Inputs" (p. 84)
and "Using Digital Input Signals as
Switch Signals" (p. 86).
0x61 INT 0 Axis Invert Direction Of
Motion For Joystick-
Controlled Axis? Should the direction of motion for
joystick-controlled axes be inverted?
Details see "Commands and
Parameters for Joystick Control" (p.
90).
0x63 FLOAT 0 Axis
Distance Between
Limit And Hard Stop
(Phys. Unit) Distance between the built-in limit
switch and the hard stop
For details, see "Referencing" (p.
28).
0x70 INT 0 Axis Reference Signal
Type Reference signal type
For details, see "Reference Switch
Detection" (p. 24).