manualshive.com logo in svg

Philips Respironics V60, User Manual

The Philips Respironics V60 is a cutting-edge respiratory support device that delivers personalized therapy to patients with respiratory disorders. Its comprehensive Service Manual provides detailed instructions and troubleshooting guidance. For easy access, this invaluable manual can be quickly downloaded for free from our website, ensuring hassle-free equipment management.

Share
Download
background image

 

3-1

Chapter 3. General information

This manual covers the Respironics V60 and V60 Plus Ventilator 
configurations. Both share the same platform. The V60 Plus Ventilator comes 
standard with High Flow Therapy (HFT). The V60 Ventilator can be field-
upgraded with HFT, subject to local regulations. For a full list of features, 
modes, and options, see "General description" on page 3-3. 

NOTE:

The 3.00 software upgrade, which permits the activation of HFT, and 
the V60 Plus Ventilator are not available in all countries.

Intended use

The Respironics V60/V60 Plus ventilator is an assist ventilator and is intended 
to augment patient breathing. It is intended for spontaneously breathing 
individuals who require mechanical ventilation: patients with respiratory 
failure, chronic respiratory insufficiency, or obstructive sleep apnea in a 
hospital or other institutional settings under the direction of a physician.

The Respironics V60/V60 Plus ventilator is intended to support pediatric 
patients (children and adolescents, weighing 20 Kg (44 lb) or greater), and 
adult patients. It is also intended for intubated patients meeting the same 
selection criteria as the noninvasive applications. The ventilator is intended to 
be used by qualified medical professionals, such as physicians, nurses, and 
respiratory therapists. The ventilator is intended to be used only with various 
combinations of Philips-recommended patient circuits, interfaces (masks), 
humidifiers, and other accessories.

Indications for use

The Respironics V60/V60 Plus is an assist ventilator and is indicated for use to 
augment patient breathing. The ventilator is indicated for spontaneously 
breathing individuals who require mechanical ventilation: patients with 
respiratory failure, chronic respiratory insufficiency, or obstructive sleep apnea 
in a hospital or other institutional settings under the direction of a physician.

Patient population

The Respironics V60/V60 Plus ventilator is intended to support pediatric 
patients (children and adolescents, weighing 20 kg (44 lb.) or greater), and 
adult patients. The ventilator is also intended for intubated patients meeting 
the same selection criteria as the noninvasive applications.

Summary of Contents for Respironics V60





















































































































































































































Reviews:

No comments

Related manuals for Respironics V60

TAL Renaissance Manual preview
Renaissance
Brand: TAL Pages: 11
Hapton Bay MARLOWE Use And Care Manual preview
MARLOWE
Brand: Hapton Bay Pages: 30
Maico ERR Series Mounting And Operating Instructions preview
ERR Series
Brand: Maico Pages: 58
ebm-papst W1G250-HJ14-02 Operating Instructions Manual preview
W1G250-HJ14-02
Brand: ebm-papst Pages: 10
lev-co SQBI Owner'S Manual preview
SQBI
Brand: lev-co Pages: 13
Kichler Lighting 300457 Instruction Manual preview
300457
Brand: Kichler Lighting Pages: 20
Harbor Breeze BOD52MW3 Manual preview
BOD52MW3
Brand: Harbor Breeze Pages: 32
Savoy ACROPOLIS Owner'S Manual preview
ACROPOLIS
Brand: Savoy Pages: 11
durabuild 7SDUB105BLK Instruction Manual preview
7SDUB105BLK
Brand: durabuild Pages: 3
Euroclima ZHK Series Instruction Manual preview
ZHK Series
Brand: Euroclima Pages: 131
Oceanic OCEAVT15CMRW User Manual preview
OCEAVT15CMRW
Brand: Oceanic Pages: 8
Klimawent WPA-10-D-3-N Use And Maintenance Manual preview
WPA-10-D-3-N
Brand: Klimawent Pages: 16
Martec IMPERIAL SERIES Instruction Book preview
IMPERIAL SERIES
Brand: Martec Pages: 7
Linea Domo DO8133 Instruction Booklet preview
Domo DO8133
Brand: Linea Pages: 46
S&P JENcoFAN Losone Select Series Installation, Operation And Maintenance Manual preview
JENcoFAN Losone Select Series
Brand: S&P Pages: 63
Orbegozo 8436044533709 Instruction Manual preview
8436044533709
Brand: Orbegozo Pages: 17
Domair SW40 User Manual preview
SW40
Brand: Domair Pages: 46
Haier FFM0180HVCR - 10-03 User Manual preview
FFM0180HVCR - 10-03
Brand: Haier Pages: 7

Brands by name

Popular brands

Load more brands