Philips epiq 7, User Manual

Page: 202 / 318

The TEE transducers are classified as Type BF isolated patient-applied parts, as described in IEC
60601-1. There are no exposed conductive surfaces distal to the transducer handle. To ensure
safe operation of this transducer, read the cautions and warnings in the
“Safety” section,
especially those that address electrosurgical units, pacemakers, and defibrillators.
The following table summarizes patient safety problems, describes how to prevent them, and
lists the sections in this manual where details are provided.
WARNING
If you encounter an irregularity not listed in the following table, do not use the transducer.
Potentially serious consequences could result. Contact your Philips representative.
Ensuring Patient Safety During TEE Studies
Problem Effect on Patient Prevention See
Mechanical
damage Severe trauma, cuts,
bleeding, perforations Inspect the transducer, using both sight
and touch, before the study. “Checking the TEE
Transducer” on page
223
Electrical
damage Esophageal burns Check the transducer for frayed insulation,
kinks, or other abnormalities. Follow
procedures for checking electrical safety. “Electrical Safety and
TEE Transducers” on
page 205
Biting, scraping
transducer Tooth damage,
esophageal burns Always use a bite guard. “Bite Guards” on page
233
Insufficient
cleaning
protocol Spread of illness or
disease Thoroughly clean and disinfect the
transducer after each use. Cover the tip
and shaft with a transducer cover. Cover
the imaging system with a disposable
drape if highly pathogenic organisms are
known or suspected. “Transducer Care”
section
Transesophageal Transducers Patient Safety During TEE Studies
202 EPIQ 7 User Manual 4535 617 25341