EN 11
3139 785 31532
4.
Mechanical Instructions
2) Service position for Digital Board is given in Figure 4-6.
Figure 4-6: Digital Board Service Position
1) Remove the 3 screws to loosen the HDD assembly
as shown in Figure 4-7.
Figure 4-7
1) Unscrew screw labelled 1 in
fi
gure 4-8.
2) Lift up the harddisk in the arrow labeled 3 and 4 in
fi
gure 4-8.
3) Slide out in the direction of the arrow labeled 2 in
fi
gure 4-8.
Insulation Sheet
Figure 4-8
4) Remove 4 screws 247,248,249,250 to separate the
Bracket HDD from the HDD.
Note:
Screws 247,248,249,250 are special type of screws
that must be replaced only with those speci
fi
ed in the Service
Parts list on Chapter 10.
4.4
Dismantling of the PSU Board
1) Remove 3 mounting screw on PSU Board as shown in
fi
gure 4-9.
Figure 4-9: PSU remove screw
2) Service position for the PSU Board as shown in
fi
gure
4-10.
Figure 4-10: PSU Board Service Position
4
1
3
2
Insulation Sheet