Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 44 of 84
Ensure the Ethernet wire is plugged
into the Control Box and the Ethernet
source.
To get the reboot button to appear just
click the fixed IP Mode then click back
on Automatic.
For a Fixed IP address, get the
assigned
IP address
Netmask
Gateway
from the IT Dept., then configure the
Control Box
to “Fixed IP Mode”.
The green arrows will illuminate to the
right allowing you to enter the data into
each address.
Enter numbers into IP address and
click ok.
Do this also for both the Netmask and
Gateway.