Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 27 of 84
5.3.2 Connect Sentinel
™ Data Cable to
Sentinel
™ Socket
Sentinel
™
Wiring:
Remove the Sentinel
™
, Sentinel
™
Data
Cable, and Mounting Tool (mounting squares
and wire-ties) from the box.
Remove the slotted end cap.
Squeeze the end cap to open the slot and
allow easier insertion of Sentinel
™
Data
Cables.
Insert the Sentinel
™
Data Cable into the
socket with tab down.
Sentinel
™
and connect the Sentinel
™
Data
Cable from the previous Sentinel
™
(for all
the Sentinels
™
after the first in a pool) as
well as a second Sentinel
™
Data Cable for
next Sentinel
™
through the slotted end cap
to either of the ports (independent of order).
With the upstream sentinels
™
connected to
the powered Control Box, check the green
LED which should flash indicating power and
communication.
Slide the end cap back onto the Sentinel
™
.