Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 34 of 84
Mount Base Plate to the selected
mounting surface:
Attach the Double Socket Assembly
to 1” (25.4 mm) ball on base and
display unit and tighten tension arm.
NOTE: Always loosen the tension
arm before adjusting position.
The communication to the display
comes from the RF Modem in the
Control Box. The antenna on the
Control Box should be positioned for
best reception. Additional coax
cable is included (BOS-163) to
extend the position of the antenna
for better reception.
For Unit operation see Section 7.
5.5.1 Wireless Display Antenna
Install:
Wireless Display unit comes with an
antenna, a
30’ (9.1 m) extension
cable, and a magnetic mount. This
can be attached to any external part
of the Control Box.
The antenna should not be placed
near conduits.
Check communication
– see section
7.6 Wireless Communication Test.
BOS-163