Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 36 of 84
5.7 Data Uploads
An Internet connection is required in order for the iBOS
®
Pro 6 Series to deliver data and generate reports.
There are two ways to connect the Control Box for uploads:
1) Ethernet directly to internet via company network
2) Cellular Modem through wireless carrier to Internet
.
5.7.1 Ethernet
A 7-ft (2.1 m) CAT5e Peripheral Data
Cable is included with the Control Box for
connection from the jack specially labeled
in the Control Box to
the location’s nearest
Ethernet h
ub. If you need more than 7’
(2.1 m), you will need to acquire additional
CAT5e Peripheral Data Cable.
A quick fact sheet is available in the
appendix if you need to give this to the IT
department.
CB Ethernet Port Wall Port Ethnernet
5.7.2 Cellular Modem (Optional)
This option should be used if your network
policy does not allow uploads through
sensitive company networks.
The cellular modem acts as an Ethernet
port. Use the Automatic DHCP Settings
on the controller when setting up.
For installation see “Cellular Modem
Installation
Manual” DOC0008
5.8 Install External Shouter
The external Shouter (Optional) should be
mounted above the Control Box within the
50
’ (15.2 m) of the provided audio cable.
Connect the two leads into the audio spring
close sockets (Red/Black).