Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 18 of 84
3.4 Scrolling Display Location
(if applicable for your system)
The Scrolling Display shows which battery to
take. The people who change the batteries
must be able to see the display easily.
Method 1 Grouped
: locate all of the
Scrolling Displays together, i.e. at the end of
the battery changer bay. Many installers find
it helpful to install the displays and shouters
on a backboard before going to the site to
make a very professional look and to make
installation easier (Appendix C).
Method 2 Per Pool
: If you have two battery
changers, the Scrolling Displays for each
battery changer can be put in the bay for
that changer.
The Scrolling Displays can also be mounted
near the pool for that display.
NOTE: It is highly recommended that each
display is protected with a surge protector (see
Appendix D).
Scrolling Displays mounted together (Method 1)
Displays mounted next to each pool of batteries (Method 2)
3.5 Control Box Location
Locate Control Panel in a clean, dry safe area:
Near battery chargers.
Close to the Scrolling Displays. Ideally less
than a 25
’ (7.6 m) run for the display cable.
Less than 12
’ (3.7 m) from an AC outlet
Out of the way, so it won’t be damaged by lift
trucks or other moving objects
At a comfortable height for programming on
display
Where it won’t obstruct anything
Where it will be easy to run cable from the
chargers.
Use appropriated anchors as dictated by the wall material you
are mounting the Control Box (35 lbs. (15.9 kg))