Philadelphia Scientific
®
iBOS
®
Pro 6 Series Installation Manual
Page 77 of 84
4. Switch ID# from ID01 to ID02 to verify if can receive any signal at all. Using the remote control that
comes with the Scrolling Display follow the steps from step 3. Go to another POOL display, switch
ID# from ID02 (or whatever that display is assigned to), to ID01 to verify Control Box is sending
message correctly for ID01.
Section 3
– Type A Signs
In order to connect a Type A sign to an iBOS
®
system Series 5 or higher you will need to construct an
adaptor. The follow diagram illustrates how the adaptor is connected.
Conversely a 4 conductor phone wire can be connected directly by using a RJ45 jack, using the diagram.
As with all electrical connections all wires must be properly crimped for good connections.
RJ45
Male Jack
(tab down)
RJ11
Female
Jack
RJ45 to RJ11 Adaptor
Positions 2 & 3
Position 1
Three wires are used when
building this adaptor; they can be
any color. In this example we
have used Blue/White, Orange
and Orange/white
Tab Down View
Assembled RJ45 to RJ11 Adaptor
