Dimensions
Mounting options
DIN rail (35 mm)
Dimensions
92.5 / 72 / 62 mm
45
72
92.5
62
Installation
Remove the product from the box and inspect it for any damage. If you
believe the product to be damaged or otherwise unsound,
do not
install
the product. Please pack it back into its box and return it to the place of
purchase for replacement.
If the product is satisfactory, proceed with the installation:
1
Ensure safety warnings are adhered to
.
2
Mount the DALI application controller on DIN rail inside a mains
rated enclosure as shown in
fig 1.
To remove from DIN rail, release
the clip mechanism with a flat blade screw driver, as per
fig 2
.
3
Wire the DALI application controller as per
fig 3.
1
2
Click*
Clip mechanism
DIN rail
Specifications
Supply voltage
230 V ~ 50 Hz
Control system
DALI-2
DALI line current
2 mA
Ethernet
10 / 100 Ethernet port
Wiring
1 - 4 mm
2
Strip 6 - 7 mm
Operating temperature
0 to 45°C
Material
PC
Classification
Class II
Ingress protection
IP20
Product range
Order code
Description
zc-controller
DALI-2 application controller and Ethernet
DALI gateway
Wiring diagram
3
L
N
DA
DA
10
/
100 Ethernet
Wire preparation
1 - 4 mm
2
6 - 7 mm
Safety information
■
This product must only be installed by a licensed electrician.
■
Before commencing installation turn off and isolate the
electrical supply.
■
There are no user serviceable parts, attempting to service any
part of the product will void the warranty
■
DALI is not SELV and as such should be treated as LV.
■
As the installer, it is your responsibility to ensure you comply
to all relevant building and safety codes. Refer to application
standards for the relevant rules.
■
When the installation is complete, leave this manual with the
building’s owner for future reference.
System overview
W
allpl
at
e
zc
-c
ontr
oller
zc
-psu
DA
LI
luminair
e
Ethernet
D
ALI 2.0
L
N
LN
LN
zc-
re
la
y
Load
L
Lʼin
Lʼout
N
L
N
zc
-swit
ch
zc
-pir
L N
DA DA
N
L
L′
out
L′
in
DA DA
DALI-2 application controller
zc-controller
