© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
7
6
|
perma ECOSY
1.3
The Oil Lubrication System perma ECOSY 5
1.3.1 Markings
• The perma ECOSY 5 lubrication system is clearly marked with a
label on the pump.
• CE mark on the reservoir
• Manufacturer:
perma-tec GmbH & Co. KG
Hammelburger Straße 21
97717 Euerdorf
Germany
Tel.: +49 (0) 9704 609-0
E-mail:
info
@
perma-tec.com
Fax: +49 (0) 9704 609-50
Web page: www.perma-tec.com
1.3.2 Intended Usage
The perma ECOSY 5 lubrication system
… is intended for use on stationary machinery and equipment.
… supplies up to 6 connected lubrication points with oil, perma-
nently, precisely and at a pressure build-up of max. 10 bar.
… can be used for all lubrication points of sliding and rolling
bearings, drive and transport chains, sliding guideways,
open gears and seals.
… is only to be used for the ordered purpose and purposes
confirmed by perma-tec.
… is only to be used for operating conditions specified in this
operating manual.
… is only to be used with settings and variations specified in this
operating manual.
1.3.3 Inappropriate Use
Any other usage, setting and variation is considered to be inappro-
priate so that the manufacturer can no longer be held responsible.
DO NOT install this lubrication system in vehicles and ships, and / or
on mobile equipment and / or equipment parts!
CAUTION
