© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
43
42
|
perma ECOSY
8.4.6 PIN (Personal Identification Number)
ECOSY 5 settings can only be changed in the Edit-Mode. In order
to get to the Edit-Mode, the correct PIN must be entered. For the
initial start it is sufficient to confirm the factory set PIN “000” by
pressing “OK”.
The screen for entering and
confirming
the PIN will automatically
come up whenever there is a change of the technical settings.
The screen for
changing the PIN
can be found in the configuration
menu. Contact your local supplier if you have forgotten your PIN.
8.4.6.1 Setting the PIN
ECOSY
System On
+20 °C
Menu
B1
Press “Menu”.
B2
Menu
Parameter
Configuration
OK << >> Esc
B2
Press “>>”.
B19
Menu
Configuration
Test run
OK << >> Esc
B19
Press “OK”.
B25
Configuration
Operating mode
Temp. unit
OK << >> Esc
B25
Presss “<<”.
B44
Configuration
Change PIN
Operating mode
OK << >> Esc
B44
Press “OK”.
B45
