© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
45
44
|
perma ECOSY
8.5.2 Test Run for All Outlets
Only activated outlets are supplied with oil, where the programmed
discharge is greater than “0” (see chapter 8.3.1 “Setting of Dischar-
ge Amount”).
Single outlet
Outlet No. 2
OK -- ++ Esc
B39
Trigger a discharge with “OK” (in
this example for outlet 2) or exit
menu with “ESC” without triggering
the discharge.
If necessary, repeat test run.
This step can also be carried out if you
want to fill tubes up to a length of 2 m
(6 ft).
If necessary, carry out test runs for the
other outlets as described.
Test run
Single outlet
All outlets
OK << >> Esc
B40
Exit the menu with “ESC” and press
“ESC” as many times as necessary
until you get to the main menu.
ECOSY
System On
+20 °C
Menu
B1
Press “Menu”.
B18
Menu
Parameter
Configuration
OK << >> Esc
B18
Press “>>”.
B35
NOTE
