© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
25
24
|
perma ECOSY
8.2
Function Indication
The status of the perma ECOSY 5 is shown on the display with
“ON” or “OFF”.
If operating mode “TIME” was selected, the perma ECOSY 5 is
always “ON”.
With “SENSOR” or “CONTROL”, the lubrication system is only “ON”
if a signal is received from the machine that is to be lubricated (see
chapter 10 “Connection of ECOSY 5”).
Pre-set factory values must manually be changed according to
individual requirements.
For printing reasons, the font used in the following display illustra-
tions is not the same as in the actual display. Content and position,
however, are identical.
8.2.1 Basic Screen Layout
• Heading
• Two display lines
• Menu line with varying push-button
control functions
Headline
Display 1
Display 2
Menu
8.2.2 Main Menu
The main menu screen [B1] appears after the system has complet-
ed the self test.
ECOSY
System Off
+20 °C
Menu Reserve
B1
• Status of system (ON / OFF)
• Temperature measured by
internal sensor
• “Reserve” is only displayed as
long as the system is not filled
with enough oil.
• If you press the “Menu” button,
the sub menus can be reached.
All of the following screens can
be reached by pressing the
“Menu” button.
NOTE
