© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
27
26
|
perma ECOSY
8.3
Setting of Parameters
8.3.1 Setting of Discharge Amount
Before you start operating the lubrication system, you must change
the factory setting (0 ml/1000 h). Start and continue as follows:
ECOSY
System On
+20 °C
Menu
B1
Press “Menu”.
B2
Menu
Parameter
Configuration
OK << >> Esc
B2
Press “OK”.
B3
Parameter
Vol. outlet 1
Vol. outlet 2
OK << >> Esc
B3
Select the required outlet by pressing
the arrow “>>” button.
B4
Parameter
Vol. outlet 2
Vol. outlet 3
OK << >> Esc
B4
Press “>>” again.
Press “>>” until the arrow on the
screen appears next to the required
outlet.
B5
Parameter
Vol. outlet 3
Vol. outlet 4
OK << >> Esc
B5
In this example, the settings of outlet 3
will be changed.
Press “OK”.
B6
