© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
33
32
|
perma ECOSY
8.4.1.2 Discharge Process in Operating Mode CONTROL
• In operating mode CONTROL, the ECOSY 5 reacts to the system
status of the machine to be lubricated.
Only the machine‘s “ON” time is taken into consideration.
Downtimes are not factored in for the discharge. To this end, the
machine must send a signal (permanent signal, 24 V) to switch
the ECOSY 5 “ON” and “OFF”.
• The discharge point is calculated based on the discharge
volumes selected / set, with only the machine‘s “ON” times
being taken into consideration.
• The objective is to convey the selected volume to the lube point
in equal amounts each time (programming basis is 1000 h -
although here this represents the number of hours worked by
the machine).
System status of the machine to be lubricated
Discharge process in operating mode CONTROL
ON
OFF
ON
OFF
perma ECOSY system status and discharge cycle
t
t
