background image

© 2020 - perma-tec 

GmbH & Co. KG

 |

 

www.perma-tec.com

 

|

 

11

10

 

|

 

perma ECOSY

WARNING

2.4  

Safety When Handling Lubricants

Lubricants may cause injuries to persons and may endanger  

your health!  

Consult a doctor immediately in case there is a risk of health 

damage! 

•  Avoid swallowing lubricant!
•  Do not inhale lubricant vapors!
•  Avoid any contact of lubricant with eyes, skin and clothing!
•  Wear safety gloves and safety clothing!
•  Lubricants on traffic ways will increase the danger of slipping. 

Therefore, the floor must be cleaned immediately with special 

cleaner!

•  Observe safety data sheets of lubricants!
•  Lubricants must be transported or stored in approved  

containers!

•  Do not misuse lubricant containers and do not fill with other 

substances!

•  Do not use damaged lubricant containers!
•  Prevent lubricant from getting into soil or sewer system!
•  For the disposal of lubricants, follow the individual waste  

disposal regulations in your country!

•  Only use genuine spare-parts from perma-tec!

2.5  

Safety in Case of Fire
•  Personal protection comes before material protection!
•  Warn other people and refuse access!
•  Notify fire department (or ask someone else to do it)!
•  Suitable extinguishers: fire extinguisher for flammable  

liquids and cooking oil, carbon dioxide extinguishers!

•  Correctly dispose of irreparable lubrication systems  

- see chapter 14!

Summary of Contents for ECOSY 5





























































Reviews: