PerkinElmer Caliper IVIS Spectrum, Hardware Manual

Page: 57 / 74

51
IVIS
®
Spectrum Hardware Manual
9
Care & Maintenance
Cleaning the IVIS Spectrum . . . . . . . . . . . . . . . . . . . . . . . 51
Cleaning the Lens Protection Window . . . . . . . . . . . . . . . . . 52
Changing the Emission Filters Used in Fluorescence Imaging . . . . 53
Moving the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
9.1 Cleaning the IVIS Spectrum
If necessary, wipe the exterior surface of the IVIS Spectrum console with a soft
cloth. If the system requires more aggressive cleaning or sterilization, contact
IVIS Imaging Systems Technology Support.
DANGER
!
DANGER! DO NOT use sprays or fluids to clean the exterior or interior of the
module. Do not allow fluids of any kind to penetrate the electronics cabinet
under any circumstances. Sprays and liquids that come into contact with the
IVIS Spectrum may result in damage to the system or electrocution.
WARNING
!
WARNING! Do not use fluids or moistened towels to clean any part of the
system console where electrical or fiber optic cables make connections. Do
not use fluids of any kind near the filter wheel assembly. Turn off the electrical
power to the IVIS Spectrum by turning the front panel toggle switch to standby
and turning off the rear panel switch before engaging in cleaning operations
that use fluids. The imaging chamber power switch is located on the rear of
the system console.
Approved Cleaning
Solutions
The compounds shown in
Table 9.1
do not damage the internal finish of the
IVIS
®
Spectrum imaging chamber and are suitable as cleaners, if required. Do
not use any solution not included in this list. In particular, avoid strong bases,
bleach, or acids that may potentially damage the unit and compromise its
operation.
IMPORTANT
!
ALERT! Do not spray cleaning solutions in the imaging chamber.