manualshive.com logo in svg

PerkinElmer Caliper IVIS Spectrum, Hardware Manual

Share
Download
PerkinElmer Caliper IVIS Spectrum Hardware Manual Download Page 31

25

IVIS

® 

Spectrum Hardware Manual

6 

IVIS

®

 Spectrum Components

CCD Camera .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   26
ThermoCube Chiller Unit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   26
Imaging Chamber .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   27
Optical Components  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   28
Specimen Warming System  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   29
Laser/Galvanometer System .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   30
Crash Avoidance System .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   30
Base Enclosure  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   30
Acquisition Computer   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   31
High Reflectance Hemisphere  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   33
Accessory Cable   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   31

The IVIS

®

 Spectrum includes the following components:

•

Scientific imaging charged coupled device (CCD) camera.

•

Imaging chamber with specimen warming system.

•

Thermoelectric camera cooling system.

•

System of lenses and filters for optimum image acquisition.

•

Laser/galvanometer.

•

Photographic illumination system.

•

Integrated fluorescence system.

•

Imaging platform crash avoidance system. 

These components are integrated into one freestanding instrument that is 

equipped with casters 

(Figure 6.1)

.

A pre-configured Windows

®

-based computer enables you to control the system 

as well as acquire and analyze images.

IMPORTANT

!

ALERT!  

If you modify the IVIS Imaging System in any way, without prior 

approval from Caliper, all warranties that cover this product are void. In 

addition, the computer included with the IVIS Spectrum is specifically 

configured to run all system-related applications. Any modification of existing 

software or hardware voids all warranties.

If you have any questions, please contact IVIS Imaging Systems Technology 

Support. 

Summary of Contents for Caliper IVIS Spectrum











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands